Call 08048737747 90% Response Rate

Send Email

Compression Spring

By far the most widely used type of spring, compression springs are designed to oppose compression and return to its uncompressed length when the applied force is removed. The potential applications for compression springs are limited only by the imagination.

Heavy Duty Compression Spring

Heavy Duty Compression Spring

Product Price: Rs 410 / PieceGet Best Price

Product Details:
MaterialSpring Steel Grade 2, SS304/316
Usage/ApplicationIndustrial
Dimension40 mm
BrandShama Spring Industries
Packaging TypeBox
Surface FinishingColor Coated
Working Temperature150-250 Deg C
Pressure12 Bar
Our esteemed clients can avail from us an exclusive range of Heavy Duty Compression Spring. These are available in custom sizes and can be availed at reasonable prices. We manufacture and also trade a wide range of these springs which are contrived using high grade quality material. The springs are capable of resisting compressive loading, high performance and reliability. These are tested on various parameters in the industry.

Get Best QuoteRequest Callback
Compression Spring

Compression Spring

Product Price: Rs 1 / PieceGet Best Price

Product Details:
MaterialSpring Steel Grade 2, SS304/316
ShapeCylindrical
BrandShama Spring Industries
UsageIndustrial
Packaging TypeBox
SizeDiameter 10 mm
Wire Diameter0.20 mm
We are prominent manufacture and supplier of extensive range of superior quality Compression Spring to our esteemed clients. These are appreciated for its resistance against abrasion; durability and high performance. Our range of products is available at affordable price in the market. These are tested on various parameters in the industry before enter into the market. These are formulated using superior quality material and as per the customer's requirements.

Available Diameter: 0.10-60 mm
Get Best QuoteRequest Callback
Spiral Heavy Duty Compression Springs

Spiral Heavy Duty Compression Springs

Product Price: Rs 300 / PieceGet Best Price

Product Details:
Usage/ApplicationAutomobile, Mining, Railways, Machinery, etc
BrandShama Spring Industries
MaterialSpring Steel Grade 2, SS304/316
Diameter25 mm
Load TypeHeavy
Length100 mm
Dimensions Measurement Guide
  • Hold the base of the spring in one hand, and the calipers on the other hand.
  • Place the calipers on the outside of the last coil, measuring the largest dimension. This is called the Outside Diameter (O.D.).
  • Place the calipers on the wire in the center of the spring. This is called the Wire or Material Size. You should also measure the wire toward one end for comparison and accuracy.
  • Place the calipers on the full length of the uncompressed spring. This is called Free Length.
  • Count the total coils, beginning at one end, just next to where the wire has been cut. Be sure you count all coils, including any portion of a coil. (see diagram for example)

Service Life
It should be noted that if critical force-versus-deflection linearity is required, only the center 60-80% of the available deflection range should be employed. Thus, reserve at least the first and last 15-20% of the range for potential spring-end and adjacent coil-contact effects. These effects can be largely ignored for the majority of spring applications.

The “Suggest Maximum Deflection” used in our online and print catalog reflects the recommended inches of travel to obtain a statistical service-life of approximately 100,000 cycles(deflections) with infrequent breakage. This can be realized if the spring in question is not subjected to shock loads, rapid cycling, temperature extremes, corrosion, or stress values above those recommended. If the spring is statically loaded (not cycling), a near-infinite life can be expected. Extended spring service-life can be achieved through shot-peening. Our custom spring department can advise you regarding this procedure.

Materials
The highest grades of spring wire are used when fabricating our springs. To create cost-effective warehousing of our stock spring inventory for our customers, we offer material certification as custom springs only. Certifications of conformance for geometric tolerances set by the Spring Manufacturers Institute (SMI) are available for our stock springs upon request.
The term “spring steel” is a stock inventory term covering music wire, hard-drawn(MB) wire, and oil-tempered wire. Additionally, stock compression spring materials may include stainless steel (300 series), beryllium copper, and phosphor bronze.

Tolerances
Shama Spring manufactures our stock springs to commercial tolerances, as defined by the SMI. Calculated rates and loads based on SMI geometric tolerances have an approximate +/- 10%. Low or high-index springs will have higher values. Compression springs characteristically have an hourglass shape when coiled on an automatic coiler; therefore, outside/inside tolerance is applied to end coils only. This is an improvement consideration when selecting a spring that fits over a rod or inside a cylinder. Call us if tighter tolerance values are required for your application.

The direction of Helix (Wind)
The wind direction of our stock springs varies, both right-hand and left-hand wind. Stock springs are not sorted for wind direction. To order spring-wound a specific direction, please contact our custom spring division.

Ends Both the online catalog and the print version provide data on end configuration for our stock compression springs. Available configurations include:
  • Closed (C) – The last coil at each end is bent back to touch the previous coil to create a flat base.
  • Closed and Ground (C&G) – The closed ends of a spring are ground to a more accurate flat base. This also reduces the solid length.
  • Open (O) – The spring end coils remain open, maintaining the spring machine’s helical wind shape.


Get Best QuoteRequest Callback
Heavy Load Compression Springs

Heavy Load Compression Springs

Product Price: Rs 425 / PieceGet Best Price

Product Details:
Usage/ApplicationIndustrial
BrandShama Spring Industries
Diameter50 mm
Load TypeHeavy Duty
Packaging TypeBox
Material To Be UsedSpring Steel Grade 2, SS304/316
Clients can avail from us an extensive array of Heavy Load Compression Springs. For the fabrication of this spring, we make use of optimum quality raw material and advanced technology in compliance with the international quality standards. These springs are widely used in various industries such as engineering, tools, automobiles, aerospace, consumer applications, etc. In addition, we provide this spring in different size and compression level as per the specification provided by the client.

Features of Industrial Compression Springs:

  • Rust resistance
  • Accurate dimension
  • Fine finish

Size:
  • Diameter 40 mm to 100 mm.
Get Best QuoteRequest Callback
Light Load Compression Springs
  • Light Load Compression Springs
  • Light Load Compression Springs
  • Light Load Compression Springs
  • Light Load Compression Springs

Light Load Compression Springs

Product Price: Rs 1 / PieceGet Best Price

Product Details:
Load TypeLight
Packaging TypeBox
SizeDiameter 10 mm
Usage/ApplicationIndustrial
BrandShama Spring Industries
MaterialSpring Steel Grade 2, SS304/316, Steel
Country of OriginMade in India
Length25 mm
Size:
  • Diameter 10 mm to 63 mm. 
  • Length 25 mm to 305 mm.
Get Best QuoteRequest Callback
Medium Load Compression Spring

Medium Load Compression Spring

Product Price: Rs 2 / PieceGet Best Price

Product Details:
Load TypeMedium
Packaging TypeBox
SizeDiameter 20 mm
BrandShama Spring Industries
MaterialSpring Steel Grade 2, SS304/316
Surface TreatmentColor Coated
Working Temperature125 deg C
Available Size: Diameter 10 mm to 63 mm.
Get Best QuoteRequest Callback
Mild Steel Compression Springs

Mild Steel Compression Springs

Product Price: Rs 2 / PieceGet Best Price

Product Details:
MaterialMild Steel
BrandShama Spring Industries
UsageIndustrial
Hardness60-70 HRC
Size/Dimension20 mm Diameter
Tensile Strength400 Mpa
Packing TypeBox
Clients can avail from us an extensive array of Mild Steel Compression Springs. For the fabrication of this spring, we make use of optimum quality raw material and advanced technology in compliance with the international quality standards. These springs are widely used in various industries such as engineering, tools, automobiles, aerospace, consumer applications, etc. In addition, we provide this spring in different size and compression level as per the specification provided by the client.

Features of Industrial Compression Springs:

  • Rust resistance
  • Accurate dimension
  • Fine finish

Specifications of Industrial Compression Springs:
  • Diameter : Ranging from 0.2 mm to 60 mm

 

Get Best QuoteRequest Callback
Spring
  • Spring
  • Spring

Spring

Product Price: Rs 0.85 / PieceGet Best Price

Minimum Order Quantity: 50000 Piece

Manufacturing all kinds of Wireforms and Torsion Spring
Get Best QuoteRequest Callback

EXPLORE MORE CATEGORIES

Looking For "Compression Spring"?
Thank youYour Enquiry has been sent successfully.
© Shama Spring Industries. All Rights Reserved (Terms of Use)Developed and managed by IndiaMART InterMESH Ltd.