EXPLORE MORE CATEGORIES
- Home
- ยป
- Our Products
- »
- Tension Spring
Tension Spring
With our best industry experiences we are engaged in offering a wide range of Tension Spring. The offered springs are manufactured using superior quality of ingredients using sophisticated technologies. Our offered springs are widely used in various automobile industries as well as used for industrial purposes. The springs are tested on different parameters to ensure that we are delivering only defect free range to the end user. We also provide the springs to the users at the stipulated time frame.
Small Tension Springs
Product Price: Rs 0.15 / PieceGet Best Price
Product Details:
| Usage/Application | Brakes, Clutches, Gear Boxes, etc |
| Material | Spring Steel Grade 2,SS304/316 |
| Dimension | Diameter 5 mm |
| Brand | Shama Spring Industries |
| Packaging Type | Box |
| Wire Diameter | 1 mm |
Features of Small Tension Springs:
- Cost-effective
- Longer service life
- Dimensionally accurate
- Optimum operation
- High performance
- Seamless
- Precise construction
- Timeliness
- Competitive rates
- High strength
Get Best QuoteRequest A Callback
Tension Springs
Product Price: Rs 30 / PieceGet Best Price
Product Details:
| Usage/Application | Industrial |
| Material | Spring Steel Grade 2, SS304/316 |
| Brand | Shama Spring Industries |
| Corrosion Resistance | 90% |
| Length | 15 mm |
| Packaging Type | Box |
| Size | Diameter 5 mm |
Features:
- High load bearing capacity
- Unmatched quality
- Fine finish
Size:
- Length: 15-60 mm
- Diameter: 5-10 mm
Get Best QuoteRequest A Callback
Extension Springs
Product Price: Rs 0.55 / PieceGet Best Price
Product Details:
| Material | Spring Steel Grade 2, SS304/316 |
| Usage/Application | Industrial |
| Packaging Type | Box |
| Size | Diameter 15 mm |
| Hardness | 40 HRC |
- Hold the spring in one hand, and the calipers on the other hand.
- Place the calipers across the outside coil, either at the end of the center of the spring. This is called the Outside Diameter (O.D.).
- Place the calipers on the wire at one end of the body coil of the spring. This is called the Wire or Material Size.
- Place the calipers (or tape measure) on the full length of the spring, inside the hooks. This is called the Length (L.I.H.). (see diagram for example)
Materials;
The highest grades of spring wire are used in manufacturing Shama Spring products. Certifications of conformance for geometric tolerances for our stock springs are available upon request. We only offer material certifications for custom springs.
“Spring steel” is a term that includes music wire, hard-drawn wire, and oil-tempered wire. Alloy steels for stock extension springs are offered only in 300 series stainless.
Tolerances:
Tolerances for extension spring rates depend upon the body-diameter to wire-diameter but are usually +/- 10% and +/- 5% on the diameter. The initial tension is much more difficult to control and is offered as a reference value only.
Ends:
The ends on the extension springs offered in our stock inventory are the common machine-made hook and full-loop configurations. The hooks or loops may have an across center transition of the last coil before forming the hook or loop. The angle between hook/loop planes (end position) is random. If you need a specific end configuration, it is best to contact our custom spring department.
Finishes
Our stock extension springs contain a selection of commonly requested finishes:Zinc (upon request)Gold Irridite (upon request)Black Oxide (upon request)Passivated (upon request)None (upon request)None (can be plated upon request)
MaterialsThe highest grades of spring wire are used in manufacturing Shama Spring products. Certifications of conformance for geometric tolerances for our stock springs are available upon request. We only offer material certifications for custom springs.
“Spring steel” is a term that includes music wire, hard-drawn wire, and oil-tempered wire. Alloy steels for stock extension springs are offered only in 300 series stainless.
Tolerances
Tolerances for extension spring rates depend upon the body-diameter to wire-diameter but are usually +/- 10% and +/- 5% on the diameter. The initial tension is much more difficult to control and is offered as a reference value only.
Ends
The ends on the extension springs offered in our stock inventory are the common machine-made hook and full-loop configurations. The hooks or loops may have an across center transition of the last coil before forming the hook or loop. The angle between hook/loop planes (end position) is random. If you need a specific end configuration, it is best to contact our custom spring department.
Finishes
Our stock extension springs contain a selection of commonly requested finishes:
- Zinc (upon request)
- Gold Irridite (upon request)
- Black Oxide (upon request)
- Passivated (upon request)
- None (upon request)
- None (can be plated upon request)
Get Best QuoteRequest A Callback
Industrial Tension Springs
Product Price: Rs 10 / PieceGet Best Price
Product Details:
| Material | Spring Steel Grade 2, SS304/316 |
| Usage/Application | Industrial |
| Wire Diameter | 1-5 mm |
| Country of Origin | Made in India |
| Brand | Shama Spring Industries |
| Packaging Type | Box |
Get Best QuoteRequest A Callback